|
|
- - - Departments
Power Supply Equipment
Industrial Supplies
Breakers - Single Phase
Screws
Shop Supplies
Fittings - Valves -
Continued on Right > - - -
|
Linear Motion Components
Home - Search - Terms & Conditions - Shipping New Old Stock & Used Linear & Way Bearings, Shafts, Ball Nuts etc. Note: Measurements on this page are for general reference only and should be verified with the manufacturer when absolute accuracy is required. Photos (when available) will be listed in the "Inventory list order" below the list. Most bearings will have warn, damaged or missing factory packaging.
Linear System SWS 6 UU, ball bushing, app 0.398" ID x 0.628" OD x 0.875" OAL - New Old Stock - 110312z198 Price $24.00 ea. - 3 Available
Thomson SSU TWNO 12, 3/4" Super Smart Pillow Blocks, each pillow block has 2 linear bearings with one wiper pad. When on shafts z81, z82 and z83 the OA height is 3.186" from bottom of shaft support rail to top of 3/4" steel plate on pillow block. Steel plate on pillow block is 2.75 x 4.5" with 2 1/2" NC threaded holes 3" OC - Used in good condition - 110813z085 Note: These pillow blocks work on and are shown on the 3/4" machined shafts listed below, numbers 110813z081, z82 and z083 Price $225.00 ea. - sold in pairs. - 3 Pairs Available
Thomson Super 16 CR, ball bushing for a 1" shaft, 1.556" OD x 2.233" OAL - New Old Stock - 110312z196 Price $71.89 ea. - 1 Available
Thomson SPB 16 OPN, ball bushing & Pillow Block for a 1" shaft with an extra bushing (mfg unknown) This pillow block and extra bearing appear to be new but show some wear from being on the shelf for a while. - Used ? Possibly New ? - 110312z199 Price $145.38 for one pillow block w/extra bushing - 1 Lot Available
Barden Linear Bearing LS 16 x200, ball bushing for a 1" shaft, 1.567" OD x 2.247" OAL - New Old Stock - 110312z197 Price $60.00 ea. - 3 Available
Tycho Way Bearing SB-3210 - Metal Clip (Tychoway new R987144780, old 21080), Scully Jones Co., 0.876" w x 1.994" L x 0.562 tall - New Old Stock - 070811z268 Price $1,200.00 for a Lot of 4 bearings - 1 Lot Available
Tychoway Bearing 21050 - Buna Band (Tychoway new R987144779, old 21050 & SB-3210), Scully Jones Co., 0.874" w x 2.004" L x 0.562 tall - New Old Stock - 070811z269 Price $1,200.00 for a Lot of 4 bearings - 1 Lot Available
Bendix 21050 Way Bearing - Buna Band (Tychoway new R987144779, old 21050 & SB-3210) 0.873" w x 2.029" L x 0.562 tall - New Old Stock - 070811z270 Price $300.00 ea. - 1 Available
Thomson OPN 81420 SS, ball bushing, 0.876" OD x 1.240" OAL - New Old Stock - 110312z192 Price $57.72 ea. - 4 Available
Thomson A 101824 SS, ball bushing, 1.124" OD x 1.492" OAL - New Old Stock - 110312z188 Price $45.06 ea. - 6 Available
Thomson OPN 101824 SS, ball bushing, 1.128" OD x 1.491" OAL - New Old Stock - 110312z191 Price $66.78 ea. - 4 Available
Thomson ADJ 122026 SS, ball bushing, 1.256" OD x 1.616" OAL - New Old Stock - 110312z190 Price $52.76 ea. - 7 Available
Thomson A 162536 SS, ball bushing, 1.561" OD x 2.243" OAL - New Old Stock - 110312z195 Price $134.40 ea. - 4 Available
Thomson ADJ 162536 SS, ball bushing, 1.571" OD x 2.240" OAL - New Old Stock - 110312z193 Price $147.30 ea. - 1 Available
Thomson OPN 162536 SS, ball bushing, 1.570" OD x 2.230" OAL - New Old Stock - 110312z187 Price $147.30 ea. - 17 Available
Thomson XA 162536 SS, ball bushing, 1.562" OD x 2.230" OAL - New Old Stock - 110312z194 Price $147.30 ea. - 2 Available
Warner Electric, Motion Control Systems, 2 ea. Linear screw shaft with ball nut, (2) Mod R0702 Ball Nut, PN 8107-448-014, (2) Wiper Kits R-0702/R-0705 PN 8107-101-002 & (2) screw shafts 3/4" dia x 22 1/2" long - New Old Stock - 070811z223 Price $300.00 per set - 1 Set Available
Thomson QS 3/4 L PD CP 48 Shaft, 3/4" chrome plated steel shaft, drilled and mounted on two SR 12 24" shaft supports, 47 15/16" Long x .75" dia x 1.875" OA height with stainless steel end stops 1/2" x 2" dia, drilled for .375" dia alignment pins on one end. Pins are not included. - Used in good condition - 110813z081 Price $285.00 ea. - 4 Available
Thomson QS 3/4 L PD CP 48 Shaft, 3/4" chrome plated steel shaft, drilled and mounted on two SR 12 24" shaft supports, 47 7/8" Long x .75" dia x 1.875" OA height, drilled for .375" dia alignment pins on both ends. -) Includes 2 pins each - Used in good condition - 110813z082w Price $275.00 ea. - 3 Available -) . - Used in good condition - 110813z082wo Price $270.00 ea. - 1 Available
Thomson QS 3/4 L PD CP 48 Shaft, 3/4" chrome plated steel shaft, drilled and mounted on two SR 12 24" shaft supports, 47 15/16" Long x .75" dia x 1.875" OA height, Not drilled for alignment pins, ends are solid. - Used in good condition - 110813z083 Price $260.00 ea. - 2 Available
Destaco Clamps on steel mounts that will attach to the support rails for the machined steel shafts listed above, # z81, z82 & z83. - Used in good condition - 110813z084 Price $150.00 for a lot of 4 - 1 Lot Available
|
- - - Departments
Industrial Supplies Continued
* * *
Production Equipment & " NOS " Inventory
Textile Ind. Machines
Embroidery & Sewing Machine Parts & Acc.
Woodworking Equipment
Environmental Equipment
Safety Equipment Breathing Equipment
Electric Tools Pneumatic Tools
Vehicles
Parts Vintage Truck Parts
Real Estate
< Continued on Left - - -
|
|
August Industries Inc., P. O. Box 901 Boise, ID 83701 Phone: 208-454-2318 Fax: 208-377-4884 Email: augustindustries@hotmail.com Hours:
8:00 to 5:00 Mountain Time, Monday - Friday |
